Cybex Platinum Cloud Q Car Seat Review

Cybex Platinum Cloud Q car seat is one of the first car seats in the market with a unique recline flat feature. The unique side protection system and the load leg feature on the seat base are some other additional highlights of the product. The load leg stretches down from the bottom beneath the baby’s backbone. During any crash, the leg keeps the car seat from turning downward, reducing the number of upward motion in that period.

The linear system protection method operates along with the lather car seat and front ends to provide better side-impact protection. The car seat itself is simply securing your baby in the harness. The no-rethread harness arrangement is connected through a bar at the top of the head side section. The fresh padding combined with the Cloud Q supplies some of the expanses in the base of the car seat so that shorter babies can be seated at better angles during the journey. The car seat should be useful for kids up to 2 years, but this also depends on your baby’s height and weight.

Specifications

• Cybex Platinum Cloud Q car seat can accommodate kids weighing from 4-35 lbs.
• It can support babies of max 30 inches in height.
• The seat weighs 26 lbs, and the carrier portion of the seat weighs 14 lbs.
• The total width of the seat base at its widest point is 15 inches, and the carrier width is 17 inches.
• The overall length of Cybex Platinum Cloud Q car seat is 27 inches.

Features

• The load leg stretches down from the bottom of the baby’s back, which is a rare feature of the product to ensure the safety of the infant.
• The comfort of protected and correct installation of each seat using the latch system in contrasting variety of vehicles is a Push-On connection.
• The linear system protection piece secures into place similar to, but not moving or side panel of the vehicle with a tight grip.
• A under carrier type of indicator is used to check the correct level of recline in rear-facing orientation on the carrier on both sides.
• The indicator which is used to check the correct level of recline in rear-facing orientation on the base is ball/dual range on both sides.
• Cybex Platinum Cloud Q car seat installation is very easy as it can be attached with no base also.
• There are restrictions to limit the position of the handles of the car seat during the travel.
• There is an angle indicator near the hinge of the tensioning plate for two correct angle positions, which is easy to read.